this was our first evening meal in the new house - late in the evening, salubrious dining

The pile of top soil which was created at the start of the contract has been levelled and will return to grass over time. We haven't delineated the garden/field boundary formally yet but will do so over the summer. We've asked Allan who built the long drystone wall on the east side to undertake various jobs over the next few months and the new garden wall will be part and parcel of that package of work. We've still got plenty of sandstone left from the old house to reuse. Since this picture was taken the hens have a had a field day (in the precise sense of the words) with the newly turned soil.
When the render was being cast one area fell off and was redone with the adjacent wall (on this picture to the left) within a couple of days but it is very clear where there is a variation in colour. The product is from K Rend and we've asked the architect to speak with their rep to see how this can be remedied. The wet dash finish is very typical of this area and much of Scotland. Variations between batches of the same colour can be a problem in a number of areas be they render, paint or other finishes but for us its very noticeable on this elevation.

On the snagging list for the window supplier - the paint on the aluminium cills is dropping away at a fair rate. Thankfully the maintenance man from the supplier came here last week, remedied a number of problems and are going to replace the damaged cills. The cause of the problem appears to be unknown so we hope the issue will not return with the new ones.

Update...

Now we're in and the snag list getting shorter, it's nice to take stock and get back to 'normal' family and work life. The good weather of late is helping (why did we build a house in winter?!)
One of our outstanding issues is connection of phone and broadband to the house (ironically the caravan is still better connected than the house!) such that once this is done and we have more time, normal blog service should resume....

We are in!

No news is good news..and also reflects the lack of an internet connection.

News Update

Optimism over realism. We'll be in this caravan for a while longer!

Time Out

We're on school holidays here so amongst other things we have had a few walks up our local hill, the Dumpling, and a bit of fun on the tree swing. In between times we have to persuade the children that another trip to B&Q/Ikea/Jewsons etc etc is a worthy activity. Who are we kidding?

Not quite there yet...

The sensibilities of moving in tomorrow aren't really there as progress has been quite slow since our builder went on holiday last week. He's a very good project manager so I think it would all look a little further advanced if he'd been around. We perhaps 'ought' to wait another week but....the jobs fill the time available and Steve and I need to move in. The kitchen is messy but there isn't much left to do there and we could reasonably use it at the weekend after a good clean. The childrens' bedrooms are being carpetted tomorrow so we'll get their furniture in and blinds fitted on Saturday if possible with a view to that being our first night.

The granite worktop was fitted last weekend, just 2 weeks after templating, and we're very pleased with the result. The team were a very pleasant trio from Estonia and Lithuania. The plastic protective wrap on the doors and drawers is coming away on this photo and together with the general high dust and grime levels doesn't inspire but we reckon on using this kitchen this weekend. The caravan hob is just about adequate and the oven ok only for warming stuff. Last summer it took nephew Tommy Boy nearly an hour to part bake/part burn a pizza. We have managed to cook a good selection of food over the past 9 months, we've even entertained a few times, but a real kitchen is now beckoning.

Yesterday it felt like so little had changed in the previous week which made the thoughts of moving in later this week less likely, however with a few people on site for much of the day today we have a reasonable chance of moving in to parts of the house at the end of this week.
Today the chimney problem was resolved without taking the whole lot apart which was good news and beneficial in terms of time and hassle. The wood burning stove was tested and added to the warmth of the house on a bright sunny day. We decided to have the visible flu painted black so there was the temporary smell of the paint warming up but we think it looks the part. The internal doors and stair timbers are being oiled, some have had two coats already. The gas hob is in place and we'll move the gas bottles to their place by the wood shed in the morning. The local gas supplier is dropping off the switch over valve tomorrow. The wood shed has moved from its makeshift workshop and looks well in its final place; it doesn't look nearly so large in situ as it did on plan but is large enough to hold the solar array and accommodate a huge amount of wood.
That's a bit of a list but essentially this stage of a project becomes a bunch of lists which can remove some of the excitement. To stand and admire the views, breathe the fresh air and absorb the tranquility of the house and its setting doesn't take long and makes it easy to remember how good this is. Nine months of temporary living soon over, caravans for sale anyone?

I've found the dinner plate.....!

Our aitightness test a week ago had me crawling around in the loft at the wekend with a big torch which revealed the achilles heel of our aitightness strategy - penetrations and unsupported joints!
For the most part the vapour/air membrane is continuous within the building with joints made with tape and silicone which were then mechanically trapped beneath battens or plasterboard.
The exception to this is the loft space where the membrane was simply stapled to the underside of the rafters, between which insulation was previously fitted. This clearly makes the membrane vulnerable to gravity (!) and any air pressure difference between outside and inside the house with the ultimate risk of the membrane pulling away from the rafters - which has started to happen in one place. I have also spotted two un-taped long joints with resulting gaping holes exposing the insulation, and an unsealed soil pipe penetration. These gaps must easily account for at least half of our dinner plate size hole given that the soil vent pipe ducts were open in the bathrooms during the airtightness testing.
The ultimate solution is probably to bring down the membrane from the rafters to the loft floor and place the insulation from between the rafters on top of it, thus creating a 'cold' loft. It goes wihout saying that the penetrations need sorting out also!

One week to go?

Just one person on site to day, Billy the tiler has given the slate floor its final coat of sealant (Lithofin) so its looking quite smart. He's also sealed the showers so we'll test those out this weekend, after some serious cleaning as its pretty thick with dust inside the house.
There has been no action on the replacement chimney which is a shame as it has a knock-on effect for reslating that part of the roof, finishing the joinery in terms of boxing out the area in the bedroom and painting thereafter. As the builder is away on holiday we'll need to do the chasing. We received an invoice from the architect yesterday which is quite amusing/bemusing as we haven't seen them for some time now.
We're at the stage where there are a lot of small things to finish off but its all going very slowly. We're still moving in to a couple of rooms next Friday come what may!!!!

The cleared area where the huge dairy shed used to stand was originally going to be gravelled for car parking but we have realised how large this area is and how ridiculously expensive it would be to gravel. We really don't need such a big area just for vehicles so this is where we intend to start creating the raised beds for our veggies. We're going to use the remainder of the reclaimed roof joists from the original house (the 5m x 2m woodshed is utilising a few) to lay out the area and start filling it with last year's matured horse muck. We have presumed linear beds to follow the line of the wall but after seeing this evening's Gardener's World I quite fancy a more interesting layout, be that triangles, diamonds or some other such whimisie.

The Contura wood burning stove in place in the main sitting room. We sourced this through EcoLiving who also supplied the ground source heat pump. The photo below is of the less attractive connection through the main bedroom to the chimney but this will be boxed in when the fitting is complete. This will still be a few days as the lower section of the external chimney and roof flashing need to be replaced because they have been damaged on site and a good seal with the internal pipes can't be achieved.

The slate tiles in the hallway will receive another coat of seal this weekend.

Just a short while left in our temporary home - we moved in here in mid June 07 and we're moving out next week. Its been pretty hard work at times and I can still feel the cold of the week before Christmas but being on site while the house has been built has been fun and essential.

Passive house weekend...

After our airtightness test was done last Friday I switched off the heating, having 'cooked' the house for a couple of days to aid the thermal imaging tests. On Friday evening it was 20.5 deg. in the ground floor and 19 deg in our unheated 1st floor bedroom.
After a chilly and breezy Friday night, both these readings had dropped by just 1 deg overnight and still no heating. During the day the readings dropped a further 1 deg (tilers in - patio door fully open!) then raised a little towards the late aftenoon/evening as the sun peeped out.
Saturday night was again cold (as snow moved into northern Britain) but temperatures only dropped a couple of degrees in the house overnight, only to rise again during today to as much as 23 deg. in the ground floor and 20 deg. in our bedroom due to solar gain, despite the continuing biting cold wind outside (and leaky patio doors!).
In essence the house was behaving passively, with perhaps the circulation pump (set to continuous within the heat pump unit) helping to spread the heat from solar heated rooms to the rest of the house, an effect which will be helped further by the MVHR unit when switched on.

Airtightness testing - the man with the fan..!

Early last week we took up an offer to have the house tested for airtightness by the Leeds Met. Uni's Centre for the Built Environment. Unlike in England, such test are not (yet) a requirement of building reg's in Scotland, but given that we are aiming to achieve the AECB's Silver standard I was keen to ensure we were at the very least close to our design target!So how do we measure airtightness? Until Friday, this was a mystery - then it all fell into place; method as follows:1. Close all trickle vents, windows and doors, fill all drain/water traps.2. Open main door of house and fit blower fan sealed within frame.3. Switch on fan and measure air flow rate into house (in m.cu. per hr) when air pressure in house is a steady 50 Pascals higher than outside.4. Record this flow rate and divide by surface area of house. Hey presto, this give the air permeability figure in m3 per m2 per hr - or m/hr.The results? Pretty good for a first test appeared to be the concensus. Under the current building reg's in England, the number has to be less than 10; ours was 4.8. Put another way, if we add up all the gaps in our building we have a hole the size of a dinner plate between us and fully airtight.However, the AECB's Silver target level is 3.0 for a house using a Mechanical Extract Ventilation system, or 1.5 for MVHR (our option); in other words we need to try and reduce our dinner plate to a saucer!So where do we look? Thermal imaging and smoke tests under pressure showed airflow through the service void, all of which are connected to the 1st floor joist void and loft space. This leads me to suspect we have some leakage at the soil vent pipe penetrations and possibly the airtightness membrane joints within the loft. Another significant 'problem' is clearly the seals around the large sliding patio doors, of which we have three sets, and which were actually letting water in last week during a driving rain storm. Our tester reckoned that sorting the doors alone could bring our figure down a futher 1 to 2 m/hr, getting us much closer to our target. Other issues included leaks between plasterboard and window frames.As a postscript to this, today I noticed a 1.5 inch waste pipe in the kitchen open to the elements with a gale blowing out of it into the house which we had omitted to seal; so that's an egg cup off our dinner plate!

Today the tilers are here enjoying the peace of the weekend to get on with their work without a dozen other folks hoofing their way over the floor. Its looking good. We can't quite work out when we'll be in..so close but not certain. One of the most inspiring things is the view from the windows. We've had beautiful weather this morning and threatening clouds this afternoon; majestic skies all day.

Lots going on both inside and outside yesterday. The 24hour rainfall we've had is a reminder of the testing conditions for a house in an exposed location. There is a little water seepage under the doors on the SW corner so we've contacted the supplier to get a maintenance bod out. It is clearly a window issue rather than a building one but strong winds driving rain at that corner are as testing as you would expect in the UK.
Outside we've got a local contractor ripping up the concrete which formed the base of the old dairy shed, its an area of approx 28m x 8m and is being carted off to use as hardcore somewhere else. After its bashed down we'll be buying a lorryload of gravel to finish it.
The builder's groundworks crew have dug the trench which will carry the LPG pipe and the elec cable from the woodstore to the house. We are only using LPG for cooking but wanted the bottle away from the house (for visual reasons) and the cable is for the solar PV to connect into the house. The 1.08kw solar PV array will be mounted on the south facing roof of the woodstore and the roof is being constructed to a 36deg pitch to maximise production. The theory is to take your latitude (ours being 56degN) and subtract 20degrees. Work starts on the construction of the woodstore today and is being done by a local joiner using wood we have salvaged from the old house. They are setting up a workshop in one of the barns.


As you can see the staircase is in place and the slate flooring continues (picture of the dining area)

Latest.....

The patio area around the southwest corner of the house - sunspot for summer days and evenings. It will be topped with black limestone slabs which are due to arrive on Wednesday-ish.
After much delay the American blond oak staircase has arrived but is needing some adaptations by our onsite joiner. The timber is beautiful though and despite the general mess in the house is one of the final landmarks in the building of the house.
The above photo is of the porch area by the front door. We've continued the larch cladding in this area which looks good with the height created by the continuation of the roof line. Jim the electrician is fitting the lights we've bought in the next day or so and this includes one to uplight this area, low energy of course!
Herewith the slate flooring in the family room which attaches to the kitchen/dining. I felt most sorry for the tiler who is trying to lay 82sqm of slate tiles whilst all around are busy with their own trades, typically on Friday this numbered around 12-15 people. At one point he locked the front door so no-one else could come in. The above slating has not been sealed but the bathroom has and the finish looks super. The floor will need resealing every 3-5 years but as this can be done with a mop and bucket it doesn't seem too onerous.

The ideal low energy house?

What we've set out to do at ECF is to build a house which will use 70% less energy than one built to current building regulations. Its timber frame construction detailing hasn't wavered too far from the 'norm' to present any major problems for a timber frame kit manufacturer, decent building contractor or building control, and the costs of going this 'extra mile' haven't been excessive to the extent that they will be paid back within a decade in terms of reduced energy costs.

Earth Hour

I've spent part of this evening contributing to a National Park meeting on renewable energy and sustainable building design and feel quite fired up on the whole subject. I came home, had a great discussion with Steve (before he went to Ikea for late night house shopping), then watched Grand Designs revisited about an underground house which essentially didn't need heating even in winter.

The construction of the 'commute' between the office and the house is underway (above) and the patios are being formed around the south gable (below).
Internally the kitchen is on its way. The installers are great, very flexible in their approach which is good because there's a few bits and bobs of adjustment to sort out as well as an evening trip to Ikea tonight to change the handles! The measurements in the utility room don't stack up properly so there's amendments needed there too.